July, 2003
Technical Jargon:
Attic Insulation Baffles
“Technical Jargon” is a forum used to provide more information on terms commonly seen in U.S. Inspect reports.
Attic insulation baffles are forms, typically made of cardboard or plastic, that create a gap between the attic insulation and the roof sheathing, allowing air to flow from the soffit vents into the attic itself. Baffles are secured to the roof sheathing near the eaves. They effectively prevent the attic insulation from covering the soffit vents, promoting airflow from the soffit vents across the roof sheathing to the ridge vents.
Proper attic ventilation is essential to the preservation of the roofing materials and roof sheathing. In the past, gable vents and static roof vents were the norm. In modern construction a combination of soffit vents and ridge vents are considered much more effective.
The older gable vents (or cross ventilation) require outside influence to create airflow through the attic. Also, because the gable vents are typically installed about the mid-point of the attic, hot air is trapped at the apex of the attic. Static roof vents (or box vents) allow some hot air to escape, but like gable vents, allow hot air to be trapped under the roof ridge.
Ridge vents and soffit vents create airflow by utilizing thermal convection. The hot air rises and escapes through the ridge vents. This creates an area of negative air pressure, which pulls air into the attic from the soffit vents. The air is drawn directly across the roof sheathing, bringing it closer to the outside temperature. Problems with this system arise when the soffit vents are blocked, and the flow of air is impeded, usually by attic insulation. The problem is solved by installing insulation baffles, which are essentially a tube through the attic insulation, through which air can freely flow.
For more information about attic
ventilation, click here.
Contributed by Justin Gore
Quality Assurance Supervisor
U.S. Inspect, LLC
Other stories in this month's report:
Visit the Advisory
Report Archives
